or make 4 interest-free payments of
About our vinyl labels
Instructions to apply labels
Our custom-made labels allow you to get creative and take personalisation to a whole new level. Plus, with everything readily available you will never have to look for anything again, essentially saving you more time to do the things you love.
Add some personality to your tea, coffee, sugar jars with our custom made vinyl labels! Each label is approx 3-6cm wide.
Please note: Font 11, Font 14, Font 16, Font 17 and Font 20 are naturally wider fonts and may appear bigger than expected. Please measure your space accurately before purchasing labels.
Inclusions: 3 labels
LLC Label Font Picker
PLEASE READ BEFORE PLACING ORDER
The size is only a guide. Word lengths and different fonts could slightly alter these measurements.
The colour you select represents the colour of your font
Price is per label, per ingredient, per name. Orders placed incorrectly will be cancelled and refunded.
Labels MUST be used within two weeks of receiving them.
When listing labels just press enter between labels, please do not put comma, full stops or numbers. Please type labels as you want them to be seen, this includes capital letters.
All labels will be cut in Sentence Caps unless otherwise stated by customer
Please do not list labels all your labels in capitals unless that's how you want them cut.
Unless stated, labels with more than 1 word will automatically be cut on 2-3 lines centered
As all orders are customised to your requirements there are strictly no exchanges or refunds.
Instructions on how to apply vinyl will be sent with your order. Please read carefully before applying labels
ORDERS ARE FINAL! Due to the large volume of orders, additions cannot be made to your order as this delays the processes in place.
About our vinyl labels
Our labels are made of quality vinyl and are die-cut which means there is no backing to the label, giving you that painted look. They adhere to almost all smooth and clean surfaces such as glass, plastic, walls, mirrors, tiles and treated wood. They do not stick to raw wood, fabric, uneven or rough surfaces.
Each label is made to order and customised specifically for you. Once we design the labels, the machine cuts it, then the excess vinyl is weeded out of the decal by hand, covered with top application tape that is used for you to install the decal onto your surface.
As you can see a lengthy process goes into making your label so please ensure you order correctly and allow up to 2-3 weeks to receive your order.
Our labels come with easy to understand application instructions. Just follow the instructions step by step and nothing can go wrong. Please ensure labels are used within a week of receiving them otherwise the longer you leave it the harder it will be to apply.
The labels are easily removable but not reusable. If they give you trouble just add heat as vinyl melts or softens if exposed to high temperatures.
Providing they are applied according to our instructions the labels are water resistant 24 hours after application. The labels are not dishwasher safe, hand wash is recommended only.
Instructions to apply labels
Important notes to consider before applying vinyl
For best results and easiest application we recommend applying the labels within a week of receiving them. The longer you leave the labels the harder it will be to apply
We are not responsible for any errors while applying the vinyl. Please be patient and take your time applying the label or decal
Vinyl is not always easy to work with, especially in really hot or really cold conditions
Vinyl is only fully waterproof 24 hours AFTER application. Hand wash is recommended in warm soapy water. Do not soak labels in water and labels are NOT dishwasher friendly
Certain wall paints will reject the wall decal making it difficult to adhere
During application ensure you do not handle the vinyl for too long as the oil released from your fingers will make it difficult for the vinyl to stick to the surface
How to apply vinyl
The surface you are applying the vinyl on must be completely clean and dry. Make sure the surface is free of dust, oil and dirt. Wipe surface with warm water only, do not use any chemicals, oils or acetones
Make sure your hands are clean and dry before handling the label
Using a flat tool (a credit card or similar) press down on the label you are about to use. This will ensure the label sticks to the clear transfer tape, making it easier to peel off the paper
Remove backing from label, exposing the adhesive side. Be very careful and slow when doing this to make sure you do not tear the label in the process. If at any time the label does not want to come off the backing paper, push down the paper again in that spot, then rub label with your finger and try pulling off again. For more stubborn labels, try lifting the edge of the label with your fingernail
Once backing paper is removed, arrange label on desired surface from centre of the letters first and work your way out. Press down firmly with a flat tool over entire label to affix
It is suggested to leave the clear transfer tape on for 24hrs before peeling it off however, if you feel it is coming off easily you can start peeling away the transfer tape immediately.
Peel away transfer tape slowly and gently at an angle starting from the top and pulling down. If the letters of your label start to lift with the transfer sheet, lay it back down and press on the area again until label is affixed on the surface